Product Description

Description

Plywood with outer plies made of

1) North American wood species like red oak/white oak/birch/maple/walnut/alder/ash; 2)Europe wood species like Beech;

3)Africa wood species like Sapele/Anegre;

4)Russia wood species like white oak;

5)Chinese wood species like oak/ash/birch/basswood/elm;

others like teak or as required etc. Inner core panel usually is plywood,blockboard, particalboard or MDF, Inner plies of core panel is made of tropical hardwood and domestic eucalyptus, poplar, pine or temperate wood species.

Face/Back

1) North American wood species like red oak/white oak/birch/maple/walnut/alder/ash; 2)Europe wood species like Beech;

3)Africa wood species like Sapele/Anegre;

4)Russia wood species like white oak;

5)Chinese wood species like oak/ash/birch/basswood/elm; others like teak or as required etc

Face veneer grade: A,B,C,D rustic, back veneer grade: 1, 2,3,4

F/B Thickness

0.3mm,0.5mm,0.6mm

Core

plywood, blockboard, particleboard, MDF

J,L,L,M

Glue

* Interior: on the basis of urea-formaldehyde (UF) glue, for use in dry conditions (acc. to EN 636, technical class EN 636-1),

* Exterior with white glue line: on the basis of melamine-urea-formaldehyde (MUF) glue, for use in humid conditions (acc. to EN 636-2)

* Exterior: on the basis of phenol-formaldehyde (PF) glue, for use in exterior conditions (acc. to EN 636, technical class EN 636-3).

Glue: E0,E1,E2,MR,WBP(Melanmine), WBP(Phenolic),WBP(E1&Melanmine), WBP(E1&Phenolic)

Size

1220×2440mm, other sizes available as required.

Thickness

3mm to 18mm, other size available as requested.

Cutting

Plain sliced, Quarter cut, Rotary cut

Slicing

by Machine, or by hand

Matching

Book Matched, Slip Matched, Pleasing Matched, Plank Matched

Sanding

Yes, or No

Final Sanding

180 grit, 240 grit, or 320 grit

Putty Repairing

Yes, or No

Packing

Standard seaworthy packing

 The application area

Widely used for furniture, cabinets, doors, household decoration.

 Post processing:

* cutting to smaller sizes on panel saws,

* finishing of edges - straight and profiled, drilling, routing - in CNC centers,

* finishing of the plate's edges with tongue and groove.

 Product market

USA, China, EU, Africa, South America, and other countries